Description
THE ERGONOMIC DESK CHAIR
The HARA CHAIR, model THA, combines dynamic sitting with an elegant design. The patented seat meets all the requirements of an ergonomic desk chair. This ergonomic desk chair offers optimal seating comfort for eight to twelve hours. Even after half a day, you can still sit comfortably. “Active sitting” makes it possible. The split seat is flexible, adjusts automatically and adapts optimally to the angle of the pelvis. The ergonomic backrest made of breathable mesh fabric and an adjustable lumbar support supports the entire back, from the shoulders to the lumbar spine, thus preventing tension. The comfortable cushions increase seating comfort. The headrest is removable.
FOR WHOM IS THE THA MODEL SUITABLE?
This elegant ergonomic desk chair is suitable for anyone who sits for eight to twelve hours a day. This desk chair fits discreetly into offices and government offices as well as in offices and practices. The seat is 50 centimeters wide and 50 centimeters deep. For smaller people, HARA CHAIR also offers shorter seat cushions with a seat depth of 45 centimeters. Even tall people who are 200 cm or more can sit comfortably here. HARA CHAIRS are very sturdily built and can support a load of up to 120 kilograms. With a heavy-duty base for an additional charge, this model can even support a load of up to 150 kilograms. The ergonomic seat height can be adjusted from 43 to a maximum of 60 centimeters. Many office chairs can only be adjusted to a maximum of 50 centimeters as standard.
WHAT CHARACTERIZES THE HARA CHAIR THA?
The split seat enables dynamic sitting. In contrast to office chairs with a rigid seat, the movable seat modules of HARA CHAIR avoid any pressure. This relieves the spine and coccyx, protects the intervertebral discs and promotes blood circulation in the buttocks. The backrest made of breathable mesh fabric neutrally follows the natural S-curve of the spine. The ergonomic backrest also has a light lumbar support, which primarily supports the lower back. The strength and height of the lumbar support can be adjusted three-dimensionally using an integrated rotary knob or removed if necessary. Without lumbar support, the mesh backrest supports the back individually. The backrest is not height-adjustable on this model, but the angle of inclination with a synchronous mechanism and the seat depth can be adjusted for the optimal back position (with height-adjustable backrest see models NIE, NWL, ZEN-LS and ZEN). 50-millimeter castors are standard on HARA CHAIR, so that the desk chair can be easily moved even on uneven surfaces.
WHAT VERSIONS ARE AVAILABLE?
The THA model is available in black (color number 01). The cover made of polyester fabric is very robust and has breathable ventilation openings. The backrest is made of an air-permeable mesh fabric and the seat is made of special foam whose climate slats regulate heat and wick away moisture. The user therefore always feels comfortable.
WHAT ALTERNATIVES ARE THERE?
If you don’t have back problems but want to prevent problems, we recommend an office chair for dynamic sitting (see models NIE or NWL). If you have problems with your intervertebral discs or a pronounced hollow back, we recommend a health chair with strong (see model ZEN-LS) or light lumbar support (see also models ZEN, DOL and CAE), depending on your body weight.
DO YOU GET A GUARANTEE?
The warranty is two years. We think sustainably; if there is a problem, you don’t just have to throw away a HARA CHAIR. We have kept all spare parts for every HARA CHAIR model in stock for over 10 years. Simply take a photo of the defect part and we will send you the appropriate replacement.
ALLERGIES?
HARA CHAIR cares about the health of our customers. In order to avoid allergies and health problems, we do not use any harmful adhesives in the production of our office chairs to bond the fabrics to the headrest, backrest and seat padding.
HOW CAN I AVOID STATIC DISCHARGE?
You will receive an anti-static chain with your office chair. Hang this chain on the base so that it touches the floor. The anti-static chain is only necessary for certain floors, shoes and work with sensitive electronic components. It prevents possible electric shocks when sitting down in the office chair.
HOW DOES THE CHAIR COST?
The price for the HARA CHAIR model DOL is currently 699.00 euros gross. The ergonomic office chairs from HARA CHAIR are delivered to your home free of charge throughout Europe. Shipping can be tracked at any time using the shipments tracking number.
DOES HARA CHAIR HAVE DISCOUNTS?
For larger orders, HARA CHAIR offers quantity based discount:
- From 2 to 20 office chairs: 10 percent discount
- From 21 office chairs and up: 15 percent discount
CAN YOU ALSO BUY VAT-FREE?
If you are resident within the European Union and have a European VAT identification number (VAT ID number. Tax-free intra-community delivery), then we automatically do not charge you 19 percent VAT during the payment process. Please also see this link: VAT identification number
If you have a European VAT identification number, please write it in the input field under the country selection when ordering: “If available, enter your European VAT identification number (VAT ID number, tax-free intra-community delivery)”. Our website will then automatically show you the purchase price net without 19 percent VAT – provided that your VAT ID number has been entered correctly. The field for entering the VAT ID number. only opens if you select a country in the European Union when selecting a country.
If you live in a country outside the European Union (e.g. Switzerland, Norway, Lichtenstein or USA), after selecting the country you will also be shown the net purchase price without 19 percent VAT. In this case, it is not necessary to enter a VAT number.
WILL YOU GET AN INVOICE?
With every order from HARA CHAIR, the original invoice is always included in the box and will be sent to you at the same time by email with the tracking number attached. The VAT is shown separately on the invoice.
AND IF THE OFFICE CHAIR DOESN’T FIT?
After placing an order, we will contact you to ensure that you have ordered the right HARA CHAIR model (height, weight and any existing back problems are also important).
For your information, the backrests are compatible with all HARA CHAIR models, meaning that the back support can be replaced at a later date.
And if it doesn’t fit, you can send the office chair back to us within the statutory period of two weeks for 35 euros. HARA CHAIR organises the return shipping.
Product description, below we will inform you about the different
advantages of the latest HARA CHAIR models.
1. The NIE or NWL models with the split, ergonomically shaped backrest support the
shoulder girdle and neck and thus prevent tension. The back cushions are movable and
adapt optimally to the back depending on the sitting position. For the best possible comfort,
the back cushions can be adjusted in height and width. The NIE or NWL model is suitable
for everyone who sits a lot and for long periods of time. The difference between NIE and
NWL is based on the material.
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The NWL upholstery cover is made of PVC synthetic leather, which is extremely robust and
easy to care for. The NIE upholstery cover is covered with a polyester fabric. Both the
artificial leather and the polyester covers are particularly breathable due to their honeycomb
structure and thus prevent sweating. A special foam is used in the seat, the climate slats
have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite,
parquet/wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional
options.
2. The ZEN-LS model has built-in lumbar support in the back cushion. This model is very
suitable for alleviating complaints in the lower back area (e.g. herniated disc, lumbar spine
syndrome) and for supporting the spine in the lumbar region. The ZEN-LS model with built-in lumbar support is suitable for anyone who sits a lot and wants to support their lumbar
spine. If you have a severe hollow back or have had a herniated disc, this model primarily
relieves discomfort in the lower back area. Thanks to the height-adjustable.
Backrest, the support can be optimally adjusted to the lumbar region. The best way to test
whether the ZEN-LS model is the right chair for the user is by adding a rolled up towel or a
small pillow to the lumbar area of a standard office chair. The ZEN-LS is recommended for
people who find this pleasant.
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The ZEN-LS model is covered with a polyester fabric and is particularly breathable due to
its honeycomb structure, thus preventing sweating. A special foam is used in the seat, the
climate slats have a heat-regulating effect and dissipate moisture. The user always feels
comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite,
parquet/wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional
options
3. The ZEN model supports the lumbar area and shoulder girdle with a “light lumbar
support” in its ergonomic S shape, which provides pleasant support for the lumbar area and
relieves the strain on the shoulders. Many people with a hollow back or back problems after
a herniated disc find the light lumbar support pleasantly relieving. In addition, the height-adjustable backrest can be optimally adapted to each person's size and needs.
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The ZEN model is covered with a polyester fabric and is particularly breathable due to its
honeycomb structure, thus preventing sweating. A special foam is used in the seat, the
climate slats have a heat-regulating effect and dissipate moisture. The user always feels
comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite,
parquet/wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional
options.
4. The THA model with the ergonomic backrest made of air-permeable mesh and
adjustable lumbar support in height and depth, this office chair primarily supports the lower
back area. The strength of the lumbar support can be individually adjusted using an
integrated rotary knob or removed if necessary. Without lumbar support, the mesh
backrest supports the back individually.
The backrest is not height-adjustable in this model, but with the help of the synchronous
mechanism and the adjustable seat depth, the best back position and the angle of
inclination can be optimally adjusted (with a height-adjustable backrest see models NIE,
NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The THA model is covered with a polyester fabric and is particularly breathable due to its
honeycomb structure and thus prevents sweating. A special foam is used in the seat, the
climate slats have a heat-regulating effect and dissipate moisture. The user always feels
comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate / PVC, tiles / granite,
parquet / wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) are available at an additional cost. See price list with possible
additional options.
5. The DOL model follows the natural S-curve of the spine with a continuous backrest. The
well-padded, ergonomic backrest not only supports the shoulders and thus prevents
tension, it also has light lumbar support, which provides pleasant support, especially for the
lower back. The backrest is not height-adjustable in this model, but with the help of the
synchronous mechanism and the adjustable seat depth, the best back position and the
angle of inclination can be optimally adjusted (with a height-adjustable backrest see models
NIE, NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The DOL model is covered with a polyester fabric and is particularly breathable due to its
honeycomb structure, thus preventing sweating. A special foam is used in the seat, the
climate slats have a heat-regulating effect and dissipate moisture. The user always feels
comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite,
parquet/wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional
options.
6. The CAE model, with its ergonomic S-shape, supports both the lumbar area and the
shoulder area with “light lumbar support” and is at the same time very comfortable due to its
padding. Thanks to the 85 cm high backrest and wide, stable construction, the CAE model
is particularly suitable for tall and heavy people. The backrest is not height-adjustable in this
model, but with the help of the synchronous mechanism and the adjustable seat depth, the
best back position and the angle of inclination can be optimally adjusted (with a height-adjustable backrest see models NIE, NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent
discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If
you have intervertebral disc problems or a pronounced hollow back, depending on your
symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support
(see models ZEN, THA, DOL, CAE).
The CAE upholstery cover is made of PVC synthetic leather, which is extremely robust and
easy to care for. The upholstery cover is particularly breathable due to its honeycomb
structure and thus prevents sweating. A special foam is used in the seat, the climate slats
have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the
standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150
kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite,
parquet/wood and floor protection mat) or 65 mm special casters for soft floors
(carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional
options.
7. The LOB model, the three-part HARA CHAIR, brings the advantages of a two-dimensionally movable office chair to the waiting room. The seats of the three-seater are
divided and enable dynamic sitting. In contrast to waiting chairs with a rigid seat plate, the
weight of the upper body is distributed effectively. This generally reduces the pressure on
the pelvis and spine and significantly improves blood circulation in the pelvic and spine
area. The LOB upholstery cover is made of PVC synthetic leather, which is extremely
robust and easy to care for. The upholstery cover is particularly breathable due to its
honeycomb structure and thus prevents sweating. A special foam is used in the seat, the
climate slats have a heat-regulating effect and dissipate moisture. The user always feels
comfortable.
The patented pressure-relieving function of the split seat is the same for all HARA
CHAIR models. The advantages and functionality of pressure relief are explained in
detail on our website.
For further information please contact us, we will be happy to advise you personally to find
the right HARA CHAIR model for you.
Back to HARA CHAIR shop
